GEN Indicator

The GEN indicator shows the current genlock status.

• Grey: No genlock signal is detected, or the signal cannot cross-lock to project (24.00 fps vs. 23.98 fps).
• Red: During process of sync, or genlock is lost while recording.
• Green: A genlock signal matching the current HD-SDI monitor rate is locked.
• Yellow: Timing is cross-locked to compatible but not matching monitor rate. For example, genlock is 24.00 fps, and HD-SDI monitor rate is 25.00 fps.

NOTE: When the GEN indicator is yellow, DO NOT perform 3D operation. This warns that genlock source settings and camera settings are not aligned, so phasing of the sync between cameras is not guaranteed.

For more information, go to Timecode, Genlock, Multi-Camera Setup.